Freplace wood holder – A good stand of wood is essential for anyone that is heated with wood, or even for the fireplace or the casual user of a bonfire. Firewood holder keeps it organized and on the ground. If you plan to store firewood outside, a support is very valuable to protect it from wet weather which makes that the woodpile is more easily covered with a canvas and allow dry air to circulate under the woodpile. With the preparation and the right materials, you can build your own fireplace support.
Cut two tables of 16 inches (40 cm) long 2 x 6 inch (5 x 15 cm). Screw a table at each end of base rods so that the base fireplace wood holder Rails remain in place with 16-inch (40 cm) of clearance. Use a Carpenter’s square to make sure that the rails and support boards are straight.
12 Picture Gallery: Fireplace Wood Holder
Cut the 2 x 2 x 8 foot table (60 x 60 x 240 cm) remaining to 16 inches (40 cm) long and screwed the five tables of support resulting from base bars, separated by an equal distance. Flips fireplace wood holder the structure base so the base rails are at the top of the brackets.
This post topic: Fireplace