Current framing basement walls problems than the other rooms of the house that we have. Basement tends to be uneven, creating problems with the construction of the wall frames have to compensate the pitch on the ground. If your basement is an inch taller at one end than the other, part of the wall will have to build a slight angle to compensate for it.
Some basements, the area where the floor meets the walls creates a small rise doing framing basement walls of hard concrete directly. To combat this, it is necessary to include a space between the finished wall and concrete wall.
10 Picture Gallery: Problems with Framing Basement Walls
Basement walls tend to gather moisture. The moisture in the concrete walls ending absorbed by the fiberglass insulation and drywall framed walls can cause a mold problem in your basement that could spread throughout the house. Put a vapor barrier between the concrete wall and fiberglass insulation to help combat moisture.
Over time, the concrete walls and floor in the basement can begin to develop cracks. By framing basement walls, the possibility of seeing cracks when they begin and prevent further damage to your foundation it is removed.
How to Framing Basement Walls
One of the best projects home improvements is building a new room in the basement. Its fun and exciting for the whole family see that the room is built. With a little skill and some carpentry skills, you can frame a basement for a new room. Define how large is the room you want to framing basement walls. Measure one wall and put a mark on the ground. Then the same wall with the same measure and put your second mark on the floor. Mark this line with a piece of chalk.
Make sure your room is square by measuring diagonally. Walking the floor plates 5 per 10 cm. secure them on the floor with cleats or spikes in the lines marked with plaster. Place the doorway where necessary. Make this cut in the floor plates framing basement walls. Cut the top plates to fit the floor plates.
Cava tacos to your top plate. Rose walls. Then you secure them in the bottom plate. Plumb walls and adjust them to the floor joists of your house. Finish making your room in the framing basement walls removing the block or concrete wall plates 2.5 by 10 cm. Apply to the bottom and the top of the wall. Add plate 2.5 10 cm centers of 40 cm across the walls.
This post topic: Wall Ideas